Softmagnetic Core Materials | Pearls

Product Sheet

Softmagnetic pearls for suppression of interfering impulses

Due to their very high permeability, as well as very low core losses at the high frequencies of a conducted disturbance (150kHz – 30MHz) and a specifically increasing resistance, our small pearls made of nanocrystalline material are ideal for suppressing interference pulses (switching circuit). The pearls are usually attached to the base of electronic devices or threaded like a pearl string (as single-conductor choke). The Curie temperature of the  ribbon material is

approx. 570 degrees, the properties of the pearls remain largely unchanged up to approx. 120°C in continuous operation. Higher temperatures in the device are theoretically feasible, but must be checked by the customer in the application (an increase in the number of pearls may be necessary) and in order to check the resistance of the coating to the specific customer requirement.

 

Overview of our soft-magnetic pearls:

 
Types / Reference Nom. Dimensions [mm] Finished Dimensions [mm] Lfe
(cm)
Afe
(cm²)
AL nom. @10kHz / 100kHz [μH]
ca. 80.000μ
Finishing
OD  ID  H OD   ID H
FS0301- MRC068 3,6 1,7 3 spray coated* 0,83 0,02 16 coated orange
FS0402- MRC069 4 2,3 3 spray coated* 0,99 0,02 12 coated orange
FS0402- MRC070 4 2,3 2,5 spray coated* 0,99 0,02 10 coated orange
FS0402- MRC071 4 2,8 4,5 spray coated* 1,07 0,02 12 coated orange
FS0402- MRC072 4 2,3 4,5 spray coated* 0,99 0,03 18 coated orange
FS0402- MRC073 4,2 2,8 3 spray coated* 1,10 0,02 9 coated orange
FS0402- MRC074 4,5 2,8 4,5 spray coated* 1,15 0,03 15 coated orange
FS0503- MRC075  5 3,5 4,5 spray coated* 1,34 0,03 12 coated orange
FS0503- MRC076 5,2  3 3 spray coated* 1,29 0,03 12 coated orange
FS0603- MRC077 6 3 3 spray coated* 1,41 0,03 15 coated orange
FS0603- MRC078 6,8 3,5 3 spray coated* 1,62 0,04 14 coated orange
FS0703- MRC079 7 3,5 4,5 spray coated* 1,65 0,06 22 coated orange
FS1007- MRC080  10,2 7,5 4,5 spray coated* 2,78 0,05 10 coated orange
FS1108- MRC081 11,3 8,5 4,5 spray coated* 3,11 0,05 9 coated orange
FS1210- MRC082 12 10 4,5 spray coated*  3,46 0,03 6 coated orange
FS1311- MRC083 13 11,3  3 spray coated*  3,82 0,02 3 coated orange
FS1512- MRC084 15 12  3 spray coated* 4,24  0,03 5 coated orange
The information is not binding and can be adjusted without prior information.
*Spray coating is used for fixation of the core itself, there is no special confirmation of isolation. Max. dim. change ca. 1mm 
 

Download leaflet

 

You have not found the right core?
Please contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

Important note: For safety and the proper usage, you are requested to approve the offered product specification for your application. These products are designed for general electronic
devices. Performance and safety of this product for applications which could lead to physical harm is not confirmed. Be sure to examine the performance and safety when the product is used
for these applications and take appropriate measures, such as failsafe, to avoid any accident. It is the responsibility of user to take such measures.